Description Due to the high gear ratio and the large surface contact between worm and worm gear, very high torque values can be transmitted by very small sized slew drives which means highest power density. ... Read More
Product Description Our slewing drives come in a variety of model sizes from 1 inch to 25 inches, performance ranges from 0.3 to 21 kNm. We also have slewing drives of different backlash. The drives are well ... Read More
Description Our slewing gearboxes have proved well performed under extreme operating conditions. We provided slew drives with cost savings from standard parts, reduced lead times, tested and proven designs ... Read More
Gear Ratio 61 / 1 Vertical Worm Gear Slew Ring With Nema 34 And Motor Driver For CPV And CSP Product Description Function Slewing drives function with standard worm technology, in which the worm on the ... Read More
Product Description Our slewing drives come in a variety of model sizes from 1 inch to 25 inches, performance ranges from 0.3 to 21 kNm. We also have slewing drives of different backlash. The drives are well ... Read More
Description The slewing drive is a gearbox that can safely hold radial and axial loads, as well as transmit a torque for rotating. The rotation can be in a single axis or in multiple axes together. Slewing ... Read More
SE Worm Gear Solar Slew Drive Featured With High IP66 And Ready To Intall For Solar Tracker Product Description Our slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. ... Read More
Description Our slewing drive has features of reverse self-locking because of worm gear self-locking characteristics. This feature greatly enhances the stability of the host operating and safety factor. ... Read More
Product Description Function Slewing drives function with standard worm technology, in which the worm on the horizontal shaft acts as the driver for the gear, in general, the shaft is driven by electric gear ... Read More
Description People should take the hydraulic system into consideration; that is to say the required pressure and flow of the system. In addition, we should also take the connection dimensions, oil port into ... Read More
