|Place of Origin:||China|
|Minimum Order Quantity:||1 piece|
|Price:||USD 100~1100/ pc|
|Packaging Details:||plywood box|
|Delivery Time:||15~45 days|
|Payment Terms:||L/C, T/T, Western Union|
|Supply Ability:||2000 pcs per month|
|Gear Ratio:||31:1||Normal Output Torque:||533 Nm|
|Place Of Origin:||Changzhou, China||Holding Torque:||7000 Nm|
|Tilting Torque:||744 Nm||Rated Output Torque:||0.065 RPM|
|Usage:||Solar Trackers||Protect Feature:||IP66|
slewing drive for solar tracking system,
solar tracker drive
SE3 Enclosed Solar Tracker Slew Drive With 24VDC Planetary Gear Motor And Hall Sensors
The worm drive gearbox is suitable for applications which demand slow rotation with a continuous or cyclical movement capable of handling combined loads. The product is with standard dimensions for coupling an electric or hydraulic motor as well as coupling a whole system to equipment.
Due to its compactness, high rigidity and other mentioned advantages, a worm drive system is used in varying equipment such as mobile assembly platforms, satellite system, hydraulic loading cranes on haulage vehicles, small marine cranes, extendable rotating ladders, in wheel units of large marine portal transporters.
A slew worm drive system is a compactly constructed unit which consists of a slewing ring, base plate and worm. This unit brings the advantages of a slewing ring and a worm into one unit.
Parameters of slewing drive
|Model||Ratio||Rated Output Torque||Tilting Torque||Holding Torque||Axial Load||Radial Load||Efficiency||Precision||Self-locking||Weight|
1. Different motors (AC, DC, and Hydraulic) can be designed according to customer's requirement.
2. Shaft opposite to motor can choose to be hex head or not hex head.
1. Adopt Dual supporting structure for output shaft so that the max torque of gearbox is increased a lot.
2. Sun wheel and planetary wheel are connected by spline which increase the max torque of gearbox and lengthen the life.
3. We use helical gear at input stage which make the noise low anf run smoothly in high speed. The inner gear ring is separated so that we can make more ratio and the design is flexible. Gearbox and motor are located by a seam fix by screw in axial which increase the matching precision and reduce noise.
4. We use rolling pin holder inside planetary wheel.we use rolling pin grinding instead of sliding grinding so the life of gearbox is much longer.
5. Double supporting structure; Internal grinding on inner bore of planetary gears making the inner bore roundness less than 0.003mm;running by rolling instead of sliding; HRC60 gear surface precision scraping;The adopting of all these technoligies ensure the super quiet and steady operating and a long life time over 10000 hours.www
Contact Person: Jessie
Tel: +86 18800586965