Providing Innovative and Cost-effective Slewing Drives
How to Choose Between Oil plug and Oil Nipple
When designing a slewing drive applied in different applications, how to choose between oil plug and oil nipple?
In a slewing drive (or slewing ring bearing), oil plugs and oil nipples (grease fittings) play crucial roles in lubrication system maintenance. Here’s a detailed breakdown of their functions, types, and best practices for usage:
1. Oil Plug (Drain Plug / Inspection Plug)
Purpose
- Seals lubrication ports to prevent grease/oil leakage.
- Acts as a drain plug for removing old lubricant during maintenance.
- Blocks contaminants (dust, water, debris) from entering the slewing drive.
- Some magnetic plugs capture metal wear particles for condition monitoring.
Types
| Type | Description | Common Use |
| Threaded Plug | Hex head or square drive, requires a wrench | Standard sealing of oil fill/drain holes |
| Magnetic Plug | Contains a magnet to collect metal debris | High-maintenance applications |
| Quick-release Plug | Lever-operated for fast access | High-maintenance applications |
| Flush Plug | Smooth surface to avoid snagging | Used in exposed environment |
Installation Tips
✔ Use thread sealant (e.g., PTFE tape) to prevent leaks.
✔ Torque to manufacturer specs (over-tightening can strip threads).
✔ For magnetic plugs, clean periodically to remove metal particles.
2. Oil Nipple (Grease Fitting / Zerk Fitting)
Purpose
- Provides a lubrication entry point for grease guns or oil injectors.
- Enables regular re-lubrication without disassembly.
- Some have check valves to prevent backflow of contaminants.
Types
| Type | Description | Common Use |
| Standard Zerk | 1/4" or metric thread, fits most grease guns | General-purpose lubrication |
| High-pressure Nipple | Reinforced design for heavy-duty grease injection | Mining/construction equipment |
| Angled Nipple | 45° or 90° bend for hard-to-reach points | Compact slewing drives |
| Button-head Nipple | Low-profile, less prone to damage | Exposed or mobile machinery |
Installation Tips
✔ Align properly to avoid bending/shearing during greasing.
✔ Use high-quality grease (NLGI #2 for most slewing drives).
✔ Purge old grease occasionally to prevent hardening/clogging.
Comparison: Oil Plug vs. Oil Nipple
| Feature | Oil Plug | Oil Nipple |
| Function | Seals ports, drains lubricant | Allows lubricant injection |
| Maintenance | Removed only for oil changes | Used frequently for re-greasing |
| Design | Solid (no passage) | Hollow (allows grease flow) |
| Common Issues | Leaks if threads are damaged | Clogs if not cleaned properly |
Best Practices for Slewing Drive Lubrication
1. Choose the Right Lubricant
- Grease: NLGI #1 or #2 for most applications; EP (Extreme Pressure) for heavy loads.
- Oil: ISO VG 150-320 for high-speed slewing drives.
2. Lubrication Schedule
- Manual greasing: Every 50-200 operating hours (depends on load/speed).
- Automatic systems: Continuous or timed intervals.
3. Contamination Control
- Always clean the nipple before attaching a grease gun.
- Replace damaged plugs/nipples immediately.
4. Inspection
- Check for grease leakage (indicates seal failure).
- Monitor **metal particles** on magnetic plugs (sign of wear).
Common Problems & Solutions
- Leaking oil plug → Apply thread sealant or replace O-ring.
- Clogged grease nipple → Remove and clean with a wire brush.
- Over-greasing → Follow manufacturer’s volume recommendations.
Conclusion
- Oil plugs = Sealing & maintenance access points
- Oil nipples = Lubrication entry points for grease/oil
Proper selection and maintenance of both ensure longer slewing drive life and smooth operation under heavy loads.
For specific applications (e.g., wind turbines, cranes), consult the manufacturer’s lubrication guidelines. Need help selecting the right type? Let me know your slewing drive model!
Contact Person: Ms. Jessie
Tel: +86 18800586965
Fax: 86-0519-89189171
