|Place of Origin:||China|
|Minimum Order Quantity:||1 piece|
|Price:||USD 100~1100/ pc|
|Packaging Details:||plywood box|
|Delivery Time:||15~45 days|
|Payment Terms:||L/C, T/T, Western Union|
|Supply Ability:||2000 pcs per month|
|Gear Ratio:||102:1||Normal Output Torque:||9400 Nm|
|Place Of Origin:||Changzhou, China||Holding Torque:||65040 Nm|
|Tilting Torque:||135600 Nm||Self-lock:||Yes|
|Usage:||Solar Trackers||Protect Feature:||IP66|
slewing drive for solar tracking system,
solar tracker drive
17 Inch IP66 Small Slew Drive Gear Reducer For Horizontal Single Solar Tracking System
Solar trackers capture the full extent of the sun's rays because the slewing drives coule make the system follow the sun completely. According to different areas, the increase in energy captured by solar dual-axis tracking is increased by up to & more than 100% than fixed flat mounted panels, as two-axis of rotation allow the tracker to position the solar modules/panels to face perpendicular (directly at) to the sun from dawn to dusk.
In a dual axis solar trackers, we could use both two SE slewing drives and a dual axis solar tracking system.
Parameters of SE Series
|Model||Ratio||Rated Output Torque(N.m)||Tilting Torque(N.m)||Holding Torque(N.m)||Axial Load(kN)||Radial Load(kN)||Efficiency||Precision(°)||Self-locking||Weight(kg)|
Different motors (220VAC, 380VAC motors, 12VDC, 24VDC, 48VDC motors, servo motors and stepper motors) can be designed according to customer's requirement.
1. Adopt Dual supporting structure for output shaft so that the max torque of gearbox is increased a lot.
2. Sun wheel and planetary wheel are connected by spline which increase the max torque of gearbox and lengthen the life.
3. We use helical gear at input stage which make the noise low anf run smoothly in high speed. The inner gear ring is separated so that we can make more ratio and the design is flexible. Gearbox and motor are located by a seam fix by screw in axial which increase the matching precision and reduce noise.
4. We use rolling pin holder inside planetary wheel.we use rolling pin grinding instead of sliding grinding so the life of gearbox is much longer.
5. Double supporting structure; Internal grinding on inner bore of planetary gears making the inner bore roundness less than 0.003mm;running by rolling instead of sliding; HRC60 gear surface precision scraping;The adopting of all these technoligies ensure the super quiet and steady operating and a long life time over 10000 hours.
Contact Person: Jessie
Tel: +86 18800586965